Windows me – M-AUDIO Transit USB User Manual

Page 7

N
G

3. The installer will copy the Transit USB files to your computer’s hard drive.

4. Once the driver files have successfully been installed, the CD Performance

Enhancements screen will appear. By default, the performance enhancement settings for

CD and DVD playback will be selected. It is recommended you leave them selected

unless you are certain that your hardware is incompatible with these settings.

10. After the installation is complete, you may double-click on the M-Audio Transit USB

Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB

Control Panel” for more information on the Control Panel’s features and function.

Windows Me

Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later
installed. The Transit USB installer will automatically check for the correct
version of DirectX and install the latest Direct X update. This update will be
skipped if you already have DirectX version 8.1 (or higher) in your system.

1. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB

to your computer’s USB port at this time. Browse the CD content and double click the

Transit USB folder.Then double click the Transit USB Icon.

2. The M-Audio Transit USB Installer screen will appear, asking you to confirm that you

wish to install Transit USB. Click Next to continue.