Introduction, What’s in the box, Transit usb specifications – M-AUDIO Transit USB User Manual

Page 2

N
G

Technical Features:

• Supports the following sampling frequencies (in Hz):8000,9600,11025,12000,16000,22050,

24000, 32000, 44100, 48000, 88200*, 96000

• Supports 16 & 24-bit Linear PCM I/O, 16-bit AC-3 and 16-bit DTS output over S/PDIF

TOSLink

• Supports the following audio protocols:ASIO,WDM, MME, SoundManager, CoreAudio

• Unique hybrid optical/analog input jack automatically detects whether input is analog or

optical digital

• 1/8” mic input provides power for electret condenser mics

• software-controlled input and output levels, using standard Windows or MacOS

volume controls

* Transit USB does not support analog recording at 88200 Hz.

Audio Performance Specifications:

• Input: Dynamic Range 100 dB (typical –60 dB input,A-weighted);

Signal-to-Noise Ratio 100 dB (typical,A-weighted); THD+N –90 dB = 0.00316% (typical)

• Output: Dynamic Range 104 dB (typical –60 dB input, A-weighted); Signal-to-Noise

Ratio 104 dB (typical,A-weighted); THD+N –94 dB = 0.00316% (typical)

System Requirements, Windows:

Minimum:

• Pentium II 350 MHz

• 64 MB RAM

• CD-ROM drive

• Available USB 1.1 port

• Windows 98SE, Me, 2000 (SP4) or XP (SP1)
Recommended:

• Pentium III 500 MHz or faster

• 128 MB RAM or more

• DVD-ROM drive and DVD player application (for AC-3 & DTS pass-through)

Introduction

Thanks for choosing the Transit USB by M-Audio.Transit USB is your compact, professional

audio solution for any Windows or Macintosh computer*, using the convenience of USB

connectivity – no need to disassemble your computer, no bulky external power supplies.

Transit USB gives you full 24 bit digital audio at sampling rates from 8 kHz to 96 kHz, with

the flexibility of both analog and optical digital connectors in a lightweight form factor you

can carry with you anywhere.
Please take the time to read this concise Users’ Guide. It will explain how to install the

Transit USB on your computer, and tell you how to get the best performance out of your

Transit USB audio interface.
* must meet minimum system requirements

What’s in the Box?

The following items are included with your Transit USB:
• Transit USB audio interface

• One (1) standard USB cable

• One (1) TOSLink to 1/8” Optical plug adapter

• M-Audio Driver CD (includes driver installation software)

• Users’ Guide and Warranty Card

Transit USB Specifications

Product and Operational Features:

• Single USB 1.1 connection for input and output

• S/PDIF 1/8” mini Optical In or 1/8” mini Analog Mic/Line In

• S/PDIF optical out and 1/8” mini Analog Line Out

• Sleek, slim plastic case with blue power LED.

• Completely USB powered (no power supply needed)

• One year warranty