Milton CAT D9T - Manual (Page 15)

Blades Rippers Winches
Type 9SU
Capacity
(SAE J1265) 13.5 m 3 17.7 yd 3
Width (over end bits) 4310 mm 14 ft 2 in
Height 1934 mm 6 ft 4 in
Digging Depth 606 mm 23.9 in
Ground Clearance 1422 mm 56 in
Maximum Tilt 940 mm 37 in
Weight* (without
hydraulic controls) 6863 kg 15,130 lb
Total Operating
Weight** (with Blade
and Single-Shank
Ripper) 50 098 kg 110,447 lb
Type 9U
Capacity
(SAE J1265) 16.4 m 3 21.4 yd 3
Width (over end bits) 4650 mm 15 ft 3 in
Height 1934 mm 6 ft 4 in
Digging Depth 606 mm 23.9 in
Ground Clearance 1422 mm 56 in
Maximum Tilt 1014 mm 39.9 in
Type Single-Shank,
Adjustable
Parallelogram
Added Length 1570 mm 5 ft 2 in
Number of Pockets 1
Maximum Clearance 882 mm 34.7 in
Raised (under tip,
pinned in
bottom hole)
Maximum Penetration 1231 mm
48.5 in
(standard tip)
Maximum Penetration 153.8 kN
34,581 lb
Force (shank vertical)
Pry out Force
320.5 kN 72,025 lb
Weight (without 4854 kg 10,700 lb
hydraulic controls)
Total Operating
50 098 kg 110,447 lb
Weight* (with
SU-Blade and Ripper)
Type
Multi-Shank,
Adjustable
Parallelogram
Number of Pockets 3
Winch Model PA140VS
Weight* 1790 kg 3,947 lb
Oil Capacity 15 L 4 gal
Increased Tractor 557 mm 21.9 in
Length
Overall Winch
1227 mm 48.3 in
Drum Width 326 mm 12.9 in
Flange Diameter 610 mm 24 in
• Variable speed, hydraulically driven, dual
braking system, three-roller fairlead.
*Weight: Includes pump and operator
controls. With counterweight: 3705 kg
(8,169 lb).
Standards
ROPS/FOPS
• ROPS (Rollover Protective Structure)
offered by Caterpillar for the machine
meets ROPS criteria SAE J1040 MAY94,
ISO 3471:2008.
• FOPS (Falling Object Protective Structure)
meets SAE J/ISO 3449 APR98 Level II,
and ISO 3449:2005 Level II.
Added Length 1330 mm 4 ft 4 in
Weight* (without 7388 kg 16,288 lb
Sound
hydraulic controls) Overall Beam Width 2640 mm 103.9 in
Total Operating 50 623 kg 111,605 lb
Weight** (with Blade
and Single-Shank
Ripper)
*Includes blade installation arrangement,
blade tilt cylinder, and blade lift cylinders.
**Total Operating Weight: Includes hydraulic
controls, blade tilt cylinder, coolant,
lubricants, full fuel tank, ROPS, FOPS
cab, Blade, Single-Shank Ripper, 610 mm
(24 in) ES shoes, and operator.
Maximum Clearance 885 mm 34.8 in
Raised (under tip,
pinned in
bottom hole)
Maximum Penetration 498 mm
19.61 in
(standard tip)
Maximum Penetration 147.9 kN
33,249 lb
Force (shank vertical)
Pry out Force
332 kN 74,639 lb
(Multi-Shank Ripper
with one tooth)
Weight (one shank,
5550 kg 12,236 lb
without hydraulic
controls)
Additional Shank
340 kg 750 lb
• Operator sound exposure Leq (equivalent
sound pressure level) measured according
to the work cycle procedures specified in
ANSI/SAE J1166 OCT 98 is 77 dB(A),
for cab offered by Caterpillar, when
properly installed and maintained and
tested with the doors and windows closed.
• The exterior sound pressure level for
the standard machine measured at a
distance of 15 meters according to the test
procedures specified in SAE J88 APR95,
mid-gear-moving operation, is 87 dB(A).
Total Operating 50 794 kg 111,983 lb
Weight** (with
SU-Blade and
Ripper)
*Total Operating Weight: Includes hydraulic
controls, blade tilt cylinder, coolant,
lubricants, full fuel tank, ROPS, FOPS cab,
SU-Blade, Ripper, 610 mm (24 in) ES shoes,
and operator.
15