Milton CAT D9T - Manual (Page 10)

Work Tools
Equipped for versatility
Bulldozers
All blades feature a strong box-section design that resists
twisting and cracking. Blades are made of high tensile
strength steel that stands up to the most severe applications.
Heavy moldboard construction and hardened bolt-on cutting
edges and end bits add strength and durability.
•
Semi-Universal Blade – Built for tough applications
where penetration is important.
• High-Capacity Universal Blade – Maximizes capacity
for moving big loads over long distances.
• Optional Dual Tilt – Allows the operator to optimize
the blade pitch angle.
• Cutting Edges and End Bits – Cutting edges are made
of DH-2 steel. End bits are made of DH-3™ steel for
maximum service life.
• Cat Work Tools offer a range of special application blades.
Rippers
• Multi-Shank Ripper – Tailors the tractor to the material
by using one, two or three shanks.
• Single-Shank Ripper – Operator can adjust the shank
depth from the seat using an optional single-shank pin
puller. Large one-piece shank is available in deep ripping
configuration.
Rear Counterweights
Provide proper tractor balance to maximize dozing production.
Recommended if tractor is not equipped with any other
rear attachment.
Winches
Several options are available. Contact your Cat dealer.