Milton CAT 307D - Manual (Page 6)

6
The Cat 307D offers three different track options to choose from
allowing the correct machine confi guration to suit the job.
Steel Track
The standard track offering is a 450 mm (18 in) triple grouser
track. Grease-lubricated track links, split master link and sealed
track rollers reduce owning and operating costs. Steel tracks
provide optimum stability when lifting over the side. This track
is also offered in a 600 mm (24 in) width that provides additional
stability and reduced ground pressure.
Segmented Rubber Track
The 450 mm (18 in) wide segmented rubber track incorporates
the best attributes of both the steel track and the rubber belt.
Stability is maximized due to the rigid rubber pads that bolt to
the track chain. The thick rubber pads are individually serviceable,
minimizing work site damage and provide long wear life.
Rubber Pads
Offered through the dealer parts system, the 450 mm (18 in)
wide shoe has four holes that attach rubber pads to the track.
This option will prevent damage to paved road surfaces
minimizing noise and vibration during travel with a standard
steel track system.
Blade Widths
The dozer blade is an important tool used for backfi lling trenches,
levelling, landscaping, lifting and jobsite clean-up. There are
two blade options available. The standard 2320 mm (91 in)
blade comes with a replaceable weld-on dozer wear edge and
the optional 2470 mm (97 in) blade comes with a replaceable
bolt-on dozer wear edge. Both blades are constructed of
hardened steel for longer life and extreme dozing ability.
Tie-down Points
Tie-down points are located on the blade and undercarriage
for easy and safe machine tie down for transportation.
Undercarriage
Excellent stability.