5 safety label on the instrument, 6 ce conformity, 7 fulfillment of namur recommendations – VEGA VEGAPULS 61 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA__HART four-wire User Manual
Page 6: 8 fcc/ic conformity (only for usa/canada), 7 fulfillment of namur recommendations
D
uring the entire duration of use, the user is obliged to determine the
compliance of the necessary occupational safety measures with the
current valid rules and regulations and also take note of new
regulations.
2
.5 Safety label on the instrument
T
he safety approval markings and safety tips on the device must be
observed.
2
.6 CE conformity
T
his device fulfills the legal requirements of the applicable EC
guidelines. By attaching the CE mark, VEGA provides a confirmation
of successful testing. You can find the CE conformity declaration in the
download area of www.vega.com.
2
.7 Fulfillment of NAMUR recommendations
W
ith respect to compatibility, the NAMUR recommendation NE 53 is
fulfilled. This applies also to the corresponding indicating and
adjustment components. VEGA instruments are generally upward and
downward compatible.
l
S
ensor software to DTM VEGAPULS 61
l
DTM VEGAPULS
61
for adjustment software PACTware
l
I
ndicating and adjustment module for sensor software
T
he parameter adjustment of the basic sensor functions is independ-
ent of the software version. The range of available functions depends
on the respective software version of the individual components.
2
.8 FCC/IC conformity (only for USA/Canada)
VEGAPULS
sensors with all antenna versions are FCC/IC approved.
M
odifications not expressly approved by VEGA will lead to expiry of
the operating licence as per FCC/IC.
VEGAPULS
61
is in conformity with part 15 of the FCC directives and
fulfills the RSS-210 regulations. Note the corresponding regulations for
operation:
l
T
he instrument must not cause any interfering emissions
l
T
he device must be insensitive to interfering immissions, including
those that may cause undesirable operating conditions.
A
ccording to chapter "Dimensions" of this operating instructions
manual, the instrument is designed for operation with an antenna with
a max. amplification of 33 dB. The instrument must not be operated
with antennas not listed therein or those having an amplification of
more than 33 dB. The required antenna impedance is 50 Ω.
6
VEGAPULS
61 • 4 … 20
mA/HART four-wire
2 F
or your safety
28439
-EN
-100426