VEGA VEGAFLEX 83 Foundation Fieldbus PFA insulated - Manual (Page 33)

33
6 Set up with the display and adjustment module
VEGAFLEX 83 • Foundation Fieldbus
44227-EN-130910
6.4 Parameter adjustment - Extended adjustment
For technically demanding measurement loops you can carry out
extended settings in "Extended adjustment".
The main menu is divided into five sections with the following func-
tions:
Setup: Settings, e.g. medium, application, vessel, adjustment, damp-
ing, device units, unit SV 2, false signal suppression, linearization
Display: Language setting, settings for the measured value indication
as well as lighting
Diagnosis: Information, e.g. on instrument status, pointer, measure-
ment reliability, simulation, echo curve
Additional adjustments: e.g. date/time, reset, copy sensor data
Info: Instrument name, hardware and software version, date of manu-
facture, device ID, instrument features
Note:
For optimum adjustment of the measurement, the individual submenu
items in the main menu item "Setup" should be selected one after
the other and provided with the correct parameters. If possible, go
through the items in the given sequence.
The procedure is described below.
The following submenu points are available:
The submenu points described below.
In this menu item you select the distance unit and the temperature
unit.
With the distance units you can choose between m, mm and ft and
with the temperature units betwenn °C, °F and K.
Main menu
Setup - Units