VEGA VEGATOR 112 - Manual (Page 15)

15
6 Setup
VEGATOR 112 •
46106-EN-131217
Sensor Signal conditioning instrument
Level Sensor cur-
rent
LED yellow
(output)
LED red (fail-
ure)
Relay
approx.
1.2 mA
ON
approx.
2.1 mA
OFF
any
< 0.35 mA
> 6,8 mA
OFF
6.4 Function chart, two-point control
The following charts provide an overview of the switching conditions
depending on the set mode and the level.
Note:
The switching conditions in the tables are only valid if the mode
switch on the sensor is set to "Max.".
Level LED yellow (out-
put)
LED red (failure) Relay
ON
ON
OFF
OFF
ON
Dry run protection, point
level
Overfill protection, two-
point control