VEGA VEGAPULS SR 68 HART and accumulator pack - Manual (Page 32)

32
5 Connecting to power supply
VEGAPULS SR 68 • HART and accumulator pack
40934-EN-130624
1
Fig. 30: Switch on/off button outside on the housing
1 On/Off button
After switching on, the instrument carries out a self-check for approxi-
mately 30 s:
•
Internal check of the electronics
•
Indication of the instrument type, hardware and software version,
measurement loop name on the display or PC
•
Indication of the status message "F 105 Determine measured
value" on the display or PC
As soon as a plausible measured value is found, it is displayed. The
value corresponds to the actual level as well as the settings already
carried out, e.g. factory settings.