VEGA VEGAPULS SR 68 HART and accumulator pack - Manual (Page 2)

2
Quick start
VEGAPULS SR 68 • HART and accumulator pack
40934-EN-130624
Quick start
The quick start procedure enables a quick setup with many applica-
tions. You can find further information in the respective chapters of the
operating instructions manual.
1. Distance from the vessel wall > 200 mm, the antenna should
protrude > 10 mm into the vessel
ca
. 10 mm
200 mm
(7.87")
Fig. 1: Distance of the antenna to the vessel wall/vessel ceiling
2. Note min. socket diameter depending on the socket length
3. Note the instructions for sealing
For further information see chapter "Mounting".
1. Insert the battery charger into the socket of the power supply
compartment and load the integrated accumulator before setting
up the instrument.
2. Switch on the instrument by means of the button outside on the
housing.
1
Fig. 2: Switch on/off button outside on the housing
1 On/Off button
For further information see chapter "Connecting to power supply".
1. Go via the display and adjustment module to the menu "Setup".
2. Select in the menu item "Medium" the medium of your applica-
tion, for example "Powder/Dust".
Mounting
Electrical connection
Set parameters