VEGA VEGABAR 86 Profibus PA - Operating Instructions - Manual (Page 39)

39
6 Set up with the display and adjustment module
VEGABAR 86 • Profibus PA
45042-EN-131107
Menu item Parameter Default value
AI FB 1 Channel Primary Value
Scaling format Pressure
Scaling 0 % corresponds to 0 bar
100 % corresponds to measuring
range final value
Damping PV FTime 0 s
Lock adjustment Released
Reset - Display
Menu item Default value
Menu language Order-specific
Displayed value 1 Signal output in %
Displayed value 2 Measuring cell temperature in °C
Backlight Switched off
Reset - Diagnosis
Menu item Parameter Default value
Sensor status -
Peak value Pressure Actual measured value
Temperature Actual temperature values from meas-
uring cell, electronics
Simulation Process pressure
Reset - Additional settings
Menu item Parameter Default value
PIN 0000
Date/Time Actual date/Actual time
Copy in-
strument
settings
Special pa-
rameters
No reset
Scaling Scaling size Volume in l
Scaling format 0 % corresponds to 0 l
100 % corresponds to 0 l
The instrument settings are copied with this function. The following
functions are available:
•
Read from sensor: Read data from sensor and store into the
display and adjustment module
•
Write into sensor: Store data from the display and adjustment
module back to the sensor
Additional adjustments -
Copy instrument settings