VEGA VEGAPULS 63 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol - Manual (Page 4)

4
Contents
VEGAPULS 63 • Modbus and Levelmaster protocol
41364-EN-130228
Contents
1 About this document
1.1 Function ............................................................................. 6
1.2 Target group ....................................................................... 6
1.3 Symbolism used ................................................................. 6
2 For your safety
2.1 Authorised personnel ......................................................... 7
2.2 Appropriate use .................................................................. 7
2.3 Warning about incorrect use ............................................... 7
2.4 General safety instructions ................................................. 7
2.5 CE conformity ..................................................................... 8
2.6 NAMUR recommendations ................................................ 8
2.7 Radio license for Europe .................................................... 8
2.8 Radio license for USA/Canada ........................................... 8
2.9 Environmental instructions ................................................. 9
3 Product description
3.1 Configuration .................................................................... 10
3.2 Principle of operation ........................................................ 11
3.3 Packaging, transport and storage ..................................... 12
3.4 Accessories and replacement parts ................................. 12
4 Mounting
4.1 General instructions ......................................................... 14
4.2 Instructions for installation ................................................ 14
5 Connecting to power supply and bus system
5.1 Preparing the connection ................................................. 22
5.2 Connection ....................................................................... 22
5.3 Wiring plan, double chamber housing .............................. 24
5.4 Switch-on phase ............................................................... 25
6 Set up the sensor with the display and adjustment module
6.1 Adjustment volume ........................................................... 26
6.2 Insert display and adjustment module .............................. 26
6.3 Adjustment system ........................................................... 27
6.4 Parameter adjustment ...................................................... 27
6.5 Saving the parameter adjustment data ............................. 39
7 Setting up sensor and Modbus interface with PACTware
7.1 Connect the PC ................................................................ 41
7.2 Parameter adjustment with PACTware .............................. 42
7.3 Saving the parameter adjustment data ............................. 43
8 Setup with PACTware
8.1 Connect the PC ................................................................ 44
8.2 Parameter adjustment with PACTware .............................. 44
8.3 Saving the parameter adjustment data ............................. 45
9 Set up with other systems
9.1 DD adjustment programs ................................................. 46
9.2 Communicator 375, 475 ................................................... 46