VEGA VEGAFLEX 81 Foundation Fieldbus Coax probe - Manual (Page 78)

78
11 Supplement
VEGAFLEX 81 • Foundation Fieldbus
44215-EN-130910
Function block PID Control
The function block "PID Control " is a key component for various tasks in the process automation
and is used universally. PID blocks can be cascaded if this is necessary or requested due to differ-
ent time constants with the primary and secondary process measurement.
Fig. 47: Schematic presentation function block PID Control
Function block Output Splitter
The function block "Output Splitter" generates two control outputs out of one input. Each output is
a linear image of a part of the input. A retrograde calculation function is realised by using the linear
imaging function inversely. A cascading of several Output Splitters is supported by an integrated
decision table for the combinability of inputs and outputs.