VEGA VEGAFLEX series 80 Centering - Manual (Page 5)

5
1 Product description
Centering • for VEGAFLEX series 80
44967-EN-131119
K4 K5
ø 30 mm
(1.18"
)
5,5 mm (0.22"
)
ø 75 mm
(2.95")
ø 48 mm
(1.89")
ø 95 mm
(3.74")
5 mm (0.20"
)
ø 30 mm
(1.18"
)
5,5 mm (0.22"
)
ø 75 mm
(2.95")
ø 48 mm
(1.89")
ø 95 mm
(3.74")
5 mm (0.20"
)
Fig. 2: Spacers of plastic (open on the side)
K4 Spacer of plastic (PEEK) for PFA coated cables with ø 4 mm (0.16 in)
K5 Spacer of plastic (PEEK) for PFA coated rods with ø 10 mm (0.39 in)
The metallic spacers are suitable for applications with high tempera-
tures.
The elastic arms of the spacer fix the probe in the tube. Select the
spacer according to the tube inner diameter.
This kind of spacer is slid onto the rod probe and must be fastened
with special retaining rings in the required position. Suitable retaining
rings are included in the delivery.
Measurement below the spacer is not possible. For that reason mount
the spacer as close as possibe to the probe end.
You can find out which spacer is suitable for a particular tube inner
diameter in the table at the end of this chapter.
ø 16 mm
(0.63"
) ø 16 mm
(0.63"
)
M1 M2
Fig. 3: Spacers of metal for rod versions with ø 16 mm (0.63 in)
M1 Spacer of stainless steel (AISI 631) for rods and gravity weights with ø 16 mm (0.63 in) - outer ø 49.2 up to
56.3 mm (1.9 up to 2.2 in)
M2 Spacer of stainless steel (AISI 631) for rods and gravity weights with ø 16 mm (0.63 in) - outer ø 66.6 up to
84.9 mm (2.6 up to 3.3 in)
Spacers - Metal