VEGA VEGAFLEX series 80 Centering - Manual (Page 4)

4
1 Product description
Centering • for VEGAFLEX series 80
44967-EN-131119
K1 K2 K3
5,5 mm (0.22"
)
ø 75 mm
(2.95")
ø 48 mm
(1.89")
5,5 mm (0.22"
)
ø 75 mm
(2.95")
ø 48 mm
(1.89")
5,5 mm (0.22"
)
ø 75 mm
(2.95")
ø 48 mm
(1.89")
ø 30 mm
(1.18"
)
ø 95 mm
(3.74")
5 mm (0.20"
)
ø 30 mm
(1.18"
)
ø 95 mm
(3.74")
5 mm (0.20"
)
ø 30 mm
(1.18"
)
ø 95 mm
(3.74")
10 mm (0.39"
)
ø 5 mm
(0.20"
)
ø 12 mm
(0.47")
ø 8 mm
(0.32")
ø 16 mm
(0.63")
Fig. 1: Spacers of plastic
K1 Spacer of plastic (PEEK or PTFE) for rods with ø 8 mm (0.32 in)
K2 Spacer of plastic (PEEK) for rods with ø 12 mm (0.47 in)
K3 Spacer of plastic (PEEK) for rods and gravity weights with ø 16 mm (0.63 in)
These spacers are especially suitable for plastic-coated probes.
Spacers of plastic are suitable for applications up to 250° C (482° F).
Notches on the 4-arm spacer allow simple trimming. The spacer can
thus be adapted to the tube diameter.
This kind of spacer can be plugged laterally onto the probe and does
not need any other fixing components.
Use as few spacers as possible. With rod probes, one spacer at the
probe end is usually sufficient.
There are various versions for different rod or cable diameters. You
can find out which spacer is suitable for a particular probe in the table
at the end of this chapter.
Spacers - Plastic (open
on the side)