VEGA VEGAMIP R62 Receiving unit - Relay - Manual (Page 33)

Fig. 38: LED indication strip - Setting for products with good signal damping
If there is strong buildup during operation, adjustment with buildup is
recommended. A short period of operation is probably sufficient to
create buildup, or buildup can be created artifically or imitated.
In applications with products providing poor signal damping (eg plastic
granules, cereals), you should adjust the instrument to more sensitive.
This way, the VEGAMIP 62 switches very sensitively, even with a
relatively low coverage by the product.
Fig. 39: LED indication strip - Setting for products with low signal damping
Product provides little
signal damping
VEGAMIP R 62 • - Relay 33
6 Setup
41912
-
EN
-120228