VEGA VEGAMIP R62 Receiving unit - Relay - Manual (Page 15)

A
C
B
Fig. 6: Installation in front of a vessel window
A Window of non-conductive material, for example, glass, plastic, etc.
B Mounting with condensation on the inner wall of the vessel
C Inspection glass fitting
In general, the same as for metal vessels applies to concrete vessels
due to the steel braining.
In general, the same as for metal vessels applies to wood vessels due
to the liquid absorption of the wood.
VEGAMIP 62 can be used for detection of products in pipelines. In
pipelines of non-metallic products such as plastic or glass, the
measured product can be detected through the pipe wall.
x
Fig. 7: Installation in pipelines
x Min. distance 100 mm (3.94 in)
Mount the threaded version of VEGAMIP 62 in the following way:
Concrete vessel
Wood vessels
Pipelines
Threaded version
VEGAMIP R 62 • - Relay 15
4 Mounting
41912
-
EN
-120228