VEGA FIBERTRAC 31 4 … 20 mA_HART - four-wire With SIL qualification User Manual
Page 11
11
3 Product description
FIBERTRAC 31 • 4 … 20 mA/HART - four-wire
43386-EN-131119
responsible authority (in Germany, for example, offices for environ-
mental protection, trade supervisory boards, etc.)
You can find further instructions in the operating instructions manual
of the source container.
When handling radioactive sources, unnecessary radiation exposure
must be avoided. An unavoidable radiation exposure must be kept as
low as possible. Take note of the following three important measures:
1
2
3
Fig. 2: Measures for protection against radioactive radiation
1 Shielding
2 Time
3 Distance
Shielding: Provide good shielding between the radioactive source
and yourself as well as all other persons. Special source containers
(e.g. VEGASOURCE) as well as all materials with high density (e.g.
lead, iron, concrete, etc.) provide effective shielding.
Time: Stay as short a time as possible in radiation exposed areas.
Distance: Your distance to the source should be as large as possible.
The local dose rate of the radiation decreases in proportion to the
square of the distance to the radiation source.
The plant operator must appoint a radiation safety officer with the
necessary expert knowledge. He is responsible that the radiation
protection ordinance is maintained and that all radiation protection
measures are implemented.
Control areas are areas in which the local dose rate exceeds a certain
value. Only persons who undergo official dose monitoring are allowed
into these control areas. You can find the respectively valid limit values
for control areas in the guideline of the respective authority (in Ger-
many, for example, the radiation protection ordinance).
We are at your disposal for further information concerning radiation
protection and regulations in other countries.
General instructions for
radiation protection
Radiation safety officer
Control area