VEGA VEGAPULS 67 (≥ 2.0.0 - ≥ 4.0.0) HART - integrated accumulator - Manual (Page 2)

2
Quick start
VEGAPULS 67 • HART - integrated accumulator
40795-EN-121011
Quick start
The quick start enables a quick setup with many applications. You
can find further information in the respective chapters of the operating
instructions manual.
1. Distance from the vessel wall > 200 mm
200 mm
(7.87")
Fig. 1: Distance of the antenna to the vessel wall/socket configuration
2. Keep the socket short, round off the socket end
For further information see chapter "Mounting".
1. Insert the battery charger into the socket of the power supply
compartment and load the integrated accumulator before setting
up the instrument.
2. Switch on the instrument by means of the button outside on the
housing.
1
Fig. 2: Switch on/off button outside on the housing
1 On/Off button
For further information see chapter "Connecting to power supply".
1. Go via the indicating and adjustment module to the menu "Setup".
2. Select in the menu item "Medium" the medium of your applica-
tion, for example "Gravel/Pebble".
3. Select in the menu item "Application" the vessel, the application
and the vessel form, for example, silo.
Mounting
Connect electrically
Set parameters