VEGA PLICSMOBILE T61 - Manual (Page 28)

28
7 Setup
PLICSMOBILE T61 • External GSM/GPRS radio unit
37700-EN-130228
For this option, an e-mail account with name of the inbox and outbox
server (POP3/SMTP) as well as the user name/password are required
for authentication. These data are available from your e-mail provider.
You can find further information in the online help of the PLICSMO-
BILE DTM.
The measurement data can be sent either directly in the e-mail or in
an attached file. The formats TXT, CSV, HTML or XML are available.
Fig. 14: Input of the e-mail access data
For measured value transmission via SMS, no additional access data
are required because all needed information is already available via
the mobile phone contract.
For the configuration, only the URL or the IP address of the WEB-VV
server are required. When hosting is carried out through VEGA, the
server is contacted via the URL: "web-vv.vega.com". If WEB-VV is
hosted in your company, you will get the URL from your IT depart-
ment.
The setup of PLICSMOBILE and sensor is carried out via USB and
a PC with PACTware and corresponding DTM. With a SIM card with
activated CSD service, access via the radio link is also possible
(remote parameter adjustment). Keep in mind that this is carried out
via a dial-in connection, which bases invoicing on connection time.
Considerable connection costs can be incurred depending on the
duration of use.
E-mail transmission
SMS transmission
WEB-VV
Remote parameter ad-
justment (Dial-In)