VEGA VEGAPULS 63 (≥ 2.0.0 - ≥ 4.0.0) HART and accumulator pack - Manual (Page 59)

59
11 Supplement
VEGAPULS 63 • HART and accumulator pack
40794-EN-130228
Antenna encapsulation Version Process temperature (measured on the process
fitting)
PTFE Standard -40 … +200 °C (-40 … +392 °F)
Low temperature -200 … +200 °C (-328 … +392 °F)
TFM-PTFE 8 mm Standard -40 … +150 °C (-40 … +302 °F)
Low temperature -196 … +200 °C (-321 … +392 °F)
PFA Standard -40 … +200 °C (-40 … +392 °F)
PFA 8 mm Standard -40 … +200 °C (-40 … +392 °F)
PTFE with additional pro-
cess seal
FKM -25 … +130 °C (-13 … +266 °F)
EPDM -40 … +130 °C (-40 … +266 °F)
Pressure
Version Process fitting Vessel pressure
Standard Flange PN 6 -1 … 6 bar (-100 … 600 kPa/-14.5 … 87 psig)
Flange PN 10 -1 … 10 bar (-100 … 1000 kPa/-14.5 … 145 psig)
Flange PN 16, PN 40 -1 … 16 bar (-100 … 1600 kPa/-14.5 … 232 psig)
Low temperature Flange DN 50, DN 80,
2", 3"
-1 … 20 bar (-100 … 2000 kPa/-14.5 … 290 psig)
Antenna encapsulation
PFA
Flange ≤ DN 65, 2½" -1 … 16 bar (-100 … 1600 kPa/-14.5 … 232 psig)
Flange ≥ DN 80, 3" -0.5 … 16 bar (-50 … 1600 kPa/-7.3 … 232 psig)
Aseptic SMS -1 … 6 bar (-100 … 600 kPa/-14.5 … 87 psig)
Tuchenhagen Varivent
Clamp 3", 3½", 4" -1 … 10 bar (-100 … 1000 kPa/-14.5 … 145 psig)
further hygienic fittings -1 … 16 bar (-100 … 1600 kPa/-14.5 … 232 psig)
Vibration resistance 4 g at 5 … 200 Hz according to EN 60068-2-6 (vibration
with resonance)
Shock resistance 100 g, 6 ms according to EN 60068-2-27 (mechanical
shock)
Display and adjustment module
Display element
LC display with DOT matrix and backlight
Measured value indication
Ʋ Number of digits 5
Ʋ Size of digits W x H = 7 x 13 mm
Adjustment elements 4 keys
Protection rating
Ʋ unassembled IP 20
Ʋ mounted into the housing without
cover
IP 40
Materials
Ʋ Housing ABS
Ʋ Inspection window Polyester foil