VEGA VEGAPULS WL 61 4 … 20 mA_HART - two-wire - Manual (Page 2)

2
Quick start
VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire
38061-EN-121011
Quick start
The quick start enables a quick setup with many applications. You
can find further information in the respective chapters of the operating
instructions manual.
1. Distance antenna to vessel wall > 200 mm
2. Orientation with mounting strap
> 200 mm
(7.87")
Fig. 1: Distance antenna to vessel wall, orientation with mounting strap
For further information see chapter "Mounting".
1. Make sure that the power supply corresponds to the specifica-
tions on the type label.
2. Connect the instrument according to the following illustration:
1
2
Fig. 2: Wire assignment fix-connected connection cable
1 brown (+) and blue (-) to power supply or to the processing system
2 Shielding
For further information see chapter "Connecting to power supply".
1. Connect interface adapter
2. Start PACTware and then start the "VEGA project assistant".
3. Start the setup assistant in the DTM window and carry out the
predetermined steps.
The radar sensor measures the distance from the sensor to the
product surface. For indication of the real level, an allocation of the
measured distance to the percentage height must be carried out.
Mounting
Connect electrically
Set parameters
Parameterization example