VEGA VEGAWELL 52 4 … 20 mA - Manual (Page 14)

4 .4 Mounting steps with threaded connection or
housing
2
3
1
Fig. 6: Plastic housing
1 Housing
2 Seal
3 Thread
M ount VEGAWELL 52 as follows:
1 W eld the welded socket G1½ A or 1½ NPT to the vessel top
2 S hift transmitter through the mounting boss
3 T urn the thread with seal into the socket and tighten with SW 46 2)
R emoval is carried out in reverse order.
M ount VEGAWELL 52 as follows:
1 F asten the mounting bracket at the suitable height on the basin
wall
2 L ead the transmitter through the opening of the mounting bracket
and the counter nut
3 F asten counter nut with SW 46 on the thread
2) S eal the 1½ NPT thread with teflon, hemp or a similar resistant material.
Mount into the vessel
Mounting into the basin
14 VEGAWELL 52 • 4 … 20 mA
4 M ounting
35401
-EN
-111021