VEGA Replacement housing for plics instruments - Manual (Page 5)

3 Product description
3.1 Configuration
The scope of delivery encompasses:
l
Replacement housing with screwed cover
l
Locking ring
l
Check bracket
l
2 screws M3x5
l 2 lock washers 3.2 mm
l
Documentation
- this operating instructions manual
The housing consists of the basic body as well as a screwed
cover for the electronics or connection compartment.
Basic body and screwed cover are available in different
materials. Depending on the order, the screwed cover is
available with or without inspection window for the indicating
and adjustment module PLICSCOM.
1 2 3 4
Fig. 1: Versions of the replacement housing for plics instruments
1 Plastic
2 Stainless steel
3 Alu double chamber
4 Alu single chamber
3.2 Principle of operation
The housing is suitable as replacement unit for the following
plics sensors:
l
VEGAPULS series 60
l
VEGASON series 60
l
VEGAFLEX series 60
l
VEGABAR series 50 and 60
l
VEGASWING series 60
l
VEGAVIB series 60
l
VEGACAL series 60
Scope of delivery
Components
Area of application
Replacement housing for plics instruments 5
Product description
31150
-EN
-050802