Specifications, For your reference – Yamaha DVD-S796 User Manual
Page 39
39
For Your Reference
Specifications
Power supply:
U.S.A. and Canada models:
AC 120 V, 60 Hz
U.K. and Europe models:
AC 220–240 V, 50 Hz
Australia model:
AC 220–240 V, 50 Hz
Asia model:
AC 110–240 V, 50/60 Hz
Power consumption:
14 W
Dimensions:
17
1
/
8
q
(W)
k
10
7
/
8
q
(D)
k
3
7
/
8
q
(H)
[435 (W)
k
276 (D)
k
99 (H) mm]
Mass:
7 lbs. 4 oz (3.3 k
C
)
Signal system:
U.S.A. and Canada models:
NTSC
U.K., Europe and
Australia models:
PAL 625/50, PAL 525/60
General model:
PAL/NTSC
Operating temperature range:
i
41 to
i
95
o
F (
i
5 to
i
35
o
C)
Operating humidity range:
5 to 90 % RH (no condensation)
Discs played:
(1) DVD-Video disc
5
q
(12 cm) single-sided, single-layer
5
q
(12 cm) single-sided, dual-layer
5
q
(12 cm) double-sided, single-layer
3
q
(8 cm) single-sided, single-layer
3
q
(8 cm) single-sided, dual-layer
3
q
(8 cm) double-sided, single-layer
(2) Compact disc (CD-DA, Video CD)
5
q
(12 cm) disc
3
q
(8 cm) disc
Video output:
Output level:
1 Vp-p (75
)
Output terminal:
Pin jack
Number of terminals:
1 system
S video output:
Y output level:
1 Vp-p (75
)
C output level:
0.286 Vp-p (75
)
Output terminal:
S terminal
Number of terminals:
1 system
Component video output:
Asia and Australia models:
Y output level:
1 Vp-p (75
)
P
B
output level:
0.7 Vp-p (75
)
P
R
output level:
0.7 Vp-p (75
)
Output terminal:
Pin jack
(Y: green, P
B
: blue, P
R
: red)
Scart video terminal:
U.K. and Europe models:
Audio output:
Output level:
2 Vrms (1 kHz, 0 dB)
Output terminal:
Pin jack
Mixed output (L/R):
1 system
Subwoofer output:
1 system
Audio signal output characteristics:
(1) Frequency response:
³
DVD (linear audio):
2 Hz–22 kHz (48 kHz sampling)
2 Hz–44 kHz (96 kHz sampling)
³
CD audio:
2 Hz–20 kHz (EIAJ)
(2) S/N ratio:
³
CD audio:
115 dB (EIAJ)
(3) Dynamic range:
³
DVD (linear audio):
102 dB
³
CD audio:
98 dB (EIAJ)
(4) Total harmonic distortion:
³
CD audio:
0.0025 % (EIAJ)
Digital audio output:
Optical digital output:
Optical terminal
Pickup:
Wave length:
665 nm
Laser power:
CLASS
II
Laser output:
Max. 1.0 mW (Continuous)
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Power consumption in standby mode:
approx. 2.0 W