VEGA VEGACAL 67 Profibus PA - Manual (Page 29)

29
6 Set up with the display and adjustment module PLICSCOM
VEGACAL 67 • Profibus PA
31759-EN-130917
Diagnostics
Basic adjustment 3
Display
▶ Diagnostics
Service
Info
Peak value 3.1
Capacit. min.: 65.7 pF
Capacit. max.: 782.4 pF
Sensor status 3.2
OK
Trend recording 3.3
Presentation of the trend
curve
Service
Basic adjustment 4
Display
Diagnostics
▶ Service
Info
Additional PA value 4.1
Secondary Value 1
Out-Scale-Unit 4.2
Volume
hl
PV-Out-Scale Min. 4.3
0 % = 5.0 hl
100 % = 5000.0 hl
Simulation 4.4
Start simulation?
Reset 4.5
Select reset?
Language 4.6
German
Copy sensor data 4.7
Copy sensor data?
PIN 4.8
Enable?
Info
Basic adjustment 5
Display
Diagnostics
Service
▶
Info
Instrument type 5.1
VEGACAL 6x
Serial number
12345678
Date of manufacture 5.2
06. February 2012
Software version
1.30
Last change using PC 5.3
05. March 2012
Sensor characteristics 5.4
Display now?
6.10 Saving the parameter adjustment data
We recommended noting the adjusted data, e.g. in this operating
instructions manual, and archiving them afterwards. They are thus
available for multiple use or service purposes.
If VEGACAL 67 is equipped with a display and adjustment module,
the most important data can be read out of the sensor into the display
and adjustment module. The procedure is described in the operating