VEGA VEGAFLEX 62 Foundation Fieldbus - Manual (Page 57)

-
Min./Max. adjustment: this is the value of level at "Calibration Lowest Point". The unit is
defined in "level_unit"
-
When writing "cal_level_lo" and "cal_type" = 1, the "Calibration Lowest Point" is automatically set
to "sensor_value"
l cal_type
-
Min./Max. adjustment: this parameter defines the type of calibration:
-
Dry: no influence of "sensor_value" on level calibration
-
Online: current "sensor_value"determines "Calibration Highest/Lowest Point"
l level
l level_unit
l level_offset
l sensor_offset
l end_of_operation_range
l begin_of_operation_range
l product_type
-
set up to suit the process conditions
l liquids_medium_type
-
set up to suit the process conditions
l solids_medium_type
-
set up to suit the process conditions
l liquids_vessel_type
-
set up to suit the process conditions
l solids_vessel_type
-
set up to suit the process conditions
l fast_level_change
-
set up to suit the process conditions
l first_echo_factor
l pulse_velocity_correction
l echo_quality
l empty_vessel_curve_corr_dist
-
The actual distance from sensor to the product surface must be entered before creating a
false echo memory
-
The unit is defined in "sensor_range.Units Index"
l empty_vessel_curve_corr_op_code
-
Create a false echo memory. Selectable codes are: update, create new and delete
l total_sensor_value
VEGAFLEX 62 • Foundation Fieldbus 57
10 Supplement
31840
-
EN
-100426