VEGA VEGAFLEX 62 Foundation Fieldbus - Manual (Page 37)

Necessary components:
l VEGAFLEX 62
l PC with PACTware and suitable VEGA DTM
l VEGACONNECT
l Power supply unit or processing system
7 .2 Parameter adjustment with PACTware
Further setup steps are described in the operating instructions manual
"DTM C
ollection/PACTware" attached to each CD and which can also
be downloaded from our homepage. A detailed description is available
in the online help of PACTware and the VEGA DTMs.
Note:
Keep in mind that for setup of VEGAFLEX 62, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are included as a DTM Collection
on a CD. They can be purchased for a token fee from the responsible
VEGA agency. In addition, the actual PACTware version is also
available on this CD.
In addition, this DTM Collection incl. the basic version of PACTware
can be downloaded free of charge from the Internet. Move via www.
vega.com and "Downloads" to "Software".
7 .3 Parameter adjustment with AMS™
For VEGA sensors, instrument descriptions for the adjustment
program AMS™ are available as DD. The instrument descriptions are
already implemented in the current version of AMS™. For older
versions of AMS™, a free-of-charge download is available via Internet.
Go via www.vega.com and "Downloads" to the item "Software".
7 .4 Saving the parameter adjustment data
It is recommended to document or save the parameter adjustment
data. That way they are available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
VEGAFLEX 62 • Foundation Fieldbus 37
7 Set up with PACTware and other adjustment programs
31840
-
EN
-100426