VEGA VEGAPULS 61 (≥ 2.0.0 - ≤ 3.8) Foundation Fieldbus - Manual (Page 2)

Contents
1 About this document
1.1 Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
1.2 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Symbolism used. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 For your safety
2.1 Authorised personnel . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 Warning about misuse . . . . . . . . . . . . . . . . . . . . . . . 5
2.4 General safety instructions . . . . . . . . . . . . . . . . . . . . 5
2.5 Safety label on the instrument . . . . . . . . . . . . . . . . . . 6
2.6 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.7 Fulfillment of NAMUR recommendations . . . . . . . . . .
6
2.8 FCC/IC conformity (only for USA/Canada) . . . . . . . . . 6
2.9 Safety instructions for Ex areas . . . . . . . . . . . . . . . . . 7
2.10 Environmental instructions. . . . . . . . . . . . . . . . . . . . . 7
3 Product description
3.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2 Principle of operation . . . . . . . . . . . . . . . . . . . . . . . . 10
3.3 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.4 Packaging, transport and storage . . . . . . . . . . . . . . . 11
4 Mounting
4.1 General instructions . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2 Mounting preparations, mounting strap. . . . . . . . . . . . 14
4.3 Mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . 15
5 Connecting to power supply
5.1 Preparing the connection . . . . . . . . . . . . . . . . . . . . . 24
5.2 Connection procedure. . . . . . . . . . . . . . . . . . . . . . . . 25
5.3 Wiring plan, single chamber housing . . . . . . . . . . . . . 26
5.4 Wiring plan, double chamber housing . . . . . . . . . . . . 28
5.5 Wiring plan with double chamber housing Ex d . . . . . 30
5.6 Wiring plan - version IP 66/IP 68, 1 bar . . . . . . . . . . .
33
5.7 Switch on phase. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6 Set up with the indicating and adjustment module PLICSCOM
6.1 Short description . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.2 Insert indicating and adjustment module. . . . . . . . . . . 34
6.3 Adjustment system . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6.4 Setup procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6.5 Menu schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6.6 Saving the parameter adjustment data . . . . . . . . . . . . 45
7 Setup with PACTware and other adjustment programs
7.1 Connecting the PC . . . . . . . . . . . . . . . . . . . . . . . . . . 46
2 VEGAPULS 61 • Foundation Fieldbus
Contents
28449
-EN
-100426