VEGA VEGASWING 63 - Relay (DPDT) - Manual (Page 31)

31
9 Supplement
VEGASWING 63 • - Relay (DPDT)
29229-EN-130409
Density 0.7 … 2.5 g/cm³ (0.025 … 0.09 lbs/in³); 0.5 … 2.5 g/cm³
(0.018 … 0.09 lbs/in³) by switching over
Electromechanical data
Cable entry/plug (dependent on the version)
Ʋ Single chamber housing – 1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind plug M20 x 1.5; attached 1 x cable entry
M20 x 1.5
or:
– 1 x cable entry ½ NPT, 1 x blind plug ½ NPT, 1 x cable
entry ½ NPT
or:
– 1 x plug M12 x 1; 1 x blind plug M20 x 1.5
Screw terminals for wire cross-section up to 1.5 mm² (AWG 16)
Adjustment elements
Mode switch
Ʋ A Max. detection or overflow/overfill protection
Ʋ B Min. detection or dry run protection
Density changeover switch
Ʋ 0.5 0.5 … 2.5 g/cm³ (0.018 … 0.9 oz/in³)
Ʋ 0.7 0.7 … 2.5 g/cm³ (0.025 … 0.9 oz/in³)
Voltage supply
Operating voltage
20 … 253 V AC, 50/60 Hz, 20 … 72 V DC (at
U >60 V DC, the ambient temperature can be max.
50 °C/122 °F)
Power consumption 1 … 8 VA (AC), approximately 1.5 W (DC)
Electrical protective measures
Protection rating
IP 66/IP 67
Overvoltage category III
Protection class I
Approvals
Instruments with approvals can have different technical data depending on the version.
For that reason the associated approval documents of these instruments have to be carefully
noted. They are part of the delivery or can be downloaded under www.vega.com via "VEGA Tools"
and "serial number search" as well as via "Downloads" and "Approvals".