VEGA VEGASON 66 Emitting electronics - Manual (Page 16)

1
2 3
Fig. 15: Mounting the new emitting electronics
1
Emitting electronics with socket
2 Plug connector
3 Connection piece swivelling holder or transducer tube
4 .7 Mounting steps for all versions
1 Place the housing back on.
2 With Aluminium double chamber or stainless steel housing
tighten the locking screw on the socket with a screwdriver
3 Tighten the screws of the limit angle and the locking ring
with a Phillips screwdriver size x
4 Insert the locking ring with the pliers
5 Insert the electronics carefully. Make sure that the plug is in
the correct position. The notch must be in position "6.00
o'clock".
1
Fig. 16: Plug position
1
Notch
6 Tighten the two screws with the Phillips screwdriver size 1
7 Connect the connection cables according to the operating
instructions manual of the respective sensor
16 Emitting electronics - for VEGASON 64, 65, 66
Mounting
30205
-EN
-070510