VEGA VEGASON 66 Emitting electronics - Manual (Page 13)

3
1
2
Fig. 12: Dismounting the previous emitting electronics
1
Emitting electronics with adapter for transducer tube
2 Terminal screws (2 pcs.)
3 Transducer tube
3 Remove the plug connector to the transducer tube,
therefore press the lug
Warning:
Idle condition must be provided before separating the
transducer cable. Non-observance will cause damage of the
electronics!
Proceed as follows:
1 Pull the plug out of the instrument housing of the new
emitting electronics and insert it in the socket on the
transducer tube
Insert the new emitting elec-
tronics
Emitting electronics - for VEGASON 64, 65, 66 13
Mounting
30205
-
EN
-070510