VEGA VEGASON 66 Emitting electronics - Manual (Page 14)

5
1
2
3
4
Fig. 13: Mounting the new emitting electronics
1
Emitting electronics with adapter for transducer tube
2 Terminal screws (2 pcs.)
3 Groove for locking
4 Notch
5 Transducer tube
2 Plug the emitting electronics with housing to the transducer
tube. Do not squeeze any cables. The housing is in the
correct position, if the lower notch (2) of the transducer
tube is no longer visible.
3 Retighten the terminal screws
14 Emitting electronics - for VEGASON 64, 65, 66
Mounting
30205
-EN
-070510