VEGA VEGABAR 40 Profibus PA - Manual (Page 30)

30 VEGABAR 40 (Profibus PA)
Instrument modification
6 Instrument modification
6.1 Exchange of adjustment
modules
The modular construction of VEGABAR allows
retrofitting, interchange or removal of the
display module. Data previously saved (e.g.
adjustment values) are not stored in the ad-
justment module but in an EEPROM of the
electronics module and therefore readjust-
ment is not necessary. The connection of the
modules is made via a 4-pole plug connec-
tion.
Exchange of the adjustment module
Removal of the adjustment module
• Separate VEGABAR from the power
supply
• Remove the screws on the upper side of
the housing and remove the cover or the
display module
• Disconnect connection cables from the
terminals, and if applicable, pull out the
plug connection of the display module
• Remove the two screws of the adjustment
module
• Remove adjustment module and pull out
plug connection
Insertion of an adjustment module
• Plug the plug connection of the new ad-
justment module into the plug-in socket of
the electronics module
• Fasten the new adjustment module
• Reconnect the connection cables, and if
applicable, also the cable from the dis-
play module
• Replace the cover or the display module
of VEGABAR
• Reconnect VEGABAR to power supply
VEGABAR
Module
without
adjustment Module for
menu-driven
adjustment
Display
module