VEGA PACTware-DTM Collection 01_2014 - Manual (Page 19)

19
5 Operation
PACTware/DTM Collection 01/2014 • Installation, first steps
28243-EN-131203
Fig. 11: DTM view VEGAPULS 62 offline operation (not synchronized)
Online mode (represents the device data)
In online mode, the instruments on which the parameter adjustment
is to be carried out must be connected and ready for operation. By
selecting the appropriate DTM with the right mouse key and the com-
mand "Connect", the online mode is set up for operation. After double
clicking to the DTM, connection is initiated which simultaneously
checks the communication, the sensor type and additional param-
eters. Furthermore the parameters of the opened DTM parameter
page are transmitted from the device. Only when moving to another
parameter page, the data of the selected parameter page are loaded.
Via the PACTware menu item "Read data from device", all parameters
of the instruments can be loaded anytime. All modifications which
are carried out will be stored automatically in the instruments after
pushing the OK or Accept button. The DTM instance data will not be
changed.