VEGA VEGATOR 532 Ex - Manual (Page 19)

VEGA
5
10
on
0
5
10 0
1
2
1
2
3
4
5
6
7
8
9
Fig. 10: Indicating and adjustment elements - Front plate
1 Fixing screw (lead-sealable)
2 Potentiometer for switching point adjustment - Channel 1
3 Control lamp - Relay output (LED) - Channel 1
4 Control lamp - Fault message (LED) - Channel 1
5 Potentiometer for switching point adjustment - Channel 2
6 Control lamp - Relay output (LED) - Channel 2
7 Control lamp - Fault message (LED) - Channel 2
8 Control lamp - power supply (LED)
9 Fixing screw
6 .2 Adjustment elements
Control lamps (LED) in the front plate indicate operation, switching
status and fault signal.
l Green
-
Operating control lamp
-
Mains voltage on, instrument is operating
l Red
-
Failure lamp
-
Fault on the sensor circuit due to sensor failure or line break
-
The relay deenergises in case of failure
l Yellow
-
Relay control lamp
-
The yellow relay control lamp reacts depending on the set
mode (A/B)
-
Generally the relay control lamp shows the activated
(energized) condition of the relay
-
A dark relay control lamp means that the relay is deenergised
(transistor blocks)
Control lamps
VEGATOR 532 Ex • Signal conditioning instrument 19
6 Set up
23435
-EN
-090130