VEGA VEGABAR 65 Profibus PA User Manual
Page 12
Ventilation for the measuring cell or measuring cell electronics is
realised by means of a filter element in the socket of the electronics
housing. Ventilation for the electronics housing is realised via an
additional filter element in the area of the cable glands.
2
1
2
1
2
1
1
2
Fig. 3: Position of the filter elements. Upper row single chamber housing, lower
row double chamber housing
1
Filter element for ventilation of the electronics housing
2
Filter element for ventilation of the measuring cell/measuring cell electronics
Information:
Make sure that the filter elements are always free of buildup during
operation. A pressure washer must not be used for cleaning.
With instrument versions in protection IP 66/IP 68, 1 bar, the ventilation
is realised via the capillaries in the permanently connected cable. The
filter elements are replaced by blind stoppers.
Higher process temperatures often mean also higher ambient
temperatures. Make sure that the upper temperature limits stated in
chapter "Technical data" for the environment of the electronics housing
and connection cable are not exceeded.
Ventilation
Temperature limits
12
VEGABAR
65 • Profibus PA
4 Mounting
28253
-EN
-090522