VEGA VEGAFLEX 55K - Manual (Page 5)

VEGAFLEX 55K 5
HART Communicator
HART ® handheld
Adjustment with HART ® handheld
Series 50 sensors with 4 … 20 mA output
signal can also be adjusted with the HART
®
handheld or via a PC with HART ® software
(e.g. Smart version). A special DDD (Data
Device Description) is not necessary. The
sensors can be adjusted with the HART
®
standard menus of the handheld.
- +
ESC
OK
Tank 1
m (d)
12.345
Detachable adjustment module MINICOM
Product description
Adjustment with PC
The setup and adjustment of VEGAFLEX
sensors is generally done on the PC with the
adjustment program VVO (VEGA Visual
Operating) under Windows
® .
The program leads quickly through adjust-
ment and parameter setting by means of
pictures, graphics and process
visualisations.
The PC can be connected at any individual
location in the system or directly to the signal
cable. This is done by connecting the two-
wire PC interface converter VEGACONNECT 2
or 3 to the sensor or to the signal cable.
The adjustment and parameter data can be
saved with the adjustment software on the
PC and can be protected by passwords. On
request, the adjustments can be quickly
transferred to other sensors.
Adjustment with adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6-key ad-
justment module MINICOM, the adjustment
can be carried out in clear text dialogue.
The adjustment module can be plugged into
VEGAFLEX or the external indicating instru-
ment VEGADIS 50.
Thus, VEGAFLEX can also be adjusted from
the external indicating instrument VEGADIS
50.
1.3 Types and versions
VEGAFLEX series 50 K
In general, all VEGAFLEX series 50 sensors
can be adjusted with the pluggable adjust-
ment module MINICOM or with any standard
HART
® handheld. With the software VEGA
Visual Operating (VVO), it is also possible to
adjust the sensor with a PC.
4 … 20 mA sensors
Two-wire sensors for connection to a power
supply unit or a PLC.