VTech CTM-S242SD Manual - Manual (Page 90)

86
Technical specifications
Appendix
SIP contemporary trimstyle 1-line/2-line - S2310/S2320
Power requirement
PoE class 2 powered (48V)
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Message waiting signal From SIP server
Size Telephone base: 8.11 x 3.70 x 2.87 in (206 x 94 x 73 mm)
Corded handset: 8.39 x 1.89 x 1.65 in (213 x 48 x 42 mm)
SIP contemporary cordless 1-line/2-line - S2410/S2420
Power requirement
Telephone base: PoE class 2 powered (48V)
Handset: 2.4V Ni-MH battery
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Computer-Interface 1 x 10/100 Mbps RJ-45 port
LAN-Interface 1 x 10/100 Mbps RJ-45 port
Message waiting signal From SIP server
Speed Dial memory Telephone base: up to 10 memory locations; up to 32 digits
Size Telephone base: 8.03 x 6.06 x 3.78 in (204 x 154 x 96 mm)
Handset: 8.39 x 1.89 x 1.65 in (213 x 48 x 42 mm)
SIP contemporary trimstyle 1-line/2-line - S2310-6VDC/S2320-6VDC
Power requirement
6V DC @ 450mA
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Message waiting signal From SIP server
Size Telephone base: 8.11 x 3.70 x 2.87 in (206 x 94 x 73 mm)
Corded handset: 8.39 x 1.89 x 1.65 in (213 x 48 x 42 mm)