VTech CTM-S242SD Manual - Manual (Page 89)

85
Appendix
Technical specifications
Appendix
SIP classic trimstyle 1-line/2-line - S1310/S1320
Power requirement
PoE class 2 powered (48V)
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Message waiting signal From SIP server
Size Telephone base: 8.82 x 2.84 x 1.54 in (224 x 72 x 39 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
SIP classic cordless 1-line/2-line - S1410/S1420
Power requirement
Telephone base: PoE class 2 powered (48V)
Handset: 2.4V Ni-MH battery
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Computer-Interface 1 x 10/100 Mbps RJ-45 port
LAN-Interface 1 x 10/100 Mbps RJ-45 port
Message waiting signal From SIP server
Speed Dial memory Telephone base: up to 10 memory locations; up to 32 digits
Size Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm)
Handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
SIP classic charging base - C3300
Power requirement
PoE class 2 powered (48V)
Size 8.82 x 2.84 x 1.54 in (224 x 72 x 39 mm)
SIP classic cordless 1-line/2-line accessory handset - C3400/C3500
Power requirement
2.4V Ni-MH battery
Frequency control Crystal controlled PLL synthesizer
Transmit frequency 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Message waiting signal From SIP server
Size 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)