VTech CS6649_-2-3 Abridged manual - Manual (Page 8)

8
Find handset
Use this feature to find all system handsets.
To start paging:
Press FIND HANDSET on the telephone base and it
displays ** Paging **. All idle handsets ring and display
** Paging **.
To end paging:
Press , , �FF or any dialing key on a cordless
handset.
-�R-
Press
FIND HANDSET on the telephone base.
Do not press and hold FIND HANDSET for more than four seconds. It may lead to
handset deregistration.
Redial list
Each handset and the telephone base store the last 0 telephone numbers dialed.
When there are already 0 entries, the oldest entry is deleted to make room for the
new entry.
To review and dial a number from the redial list:
Press REDIAL when the telephone base/cordless handset is not in use.
Press , , or or REDIAL repeatedly until the desired entry displays.
Press or to dial while using a cordless handset.
-�R-
Lift the corded handset or press /SPEAKER to dial while using the telephone base.
To delete a redial entry:
When the desired redial entry displays, press
DELETE.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory,
caller ID log or redial list while you are on a call. Chain dialing can be useful if you
wish to access other numbers (such as bank account numbers or access codes)
from the directory, caller ID log or redial list.
To access a number while on a call:
To enter the directory, press MENU/SELECT twice (only for cordless handsets).
-�R-
To enter the caller ID log, press
MENU, then scroll to Caller ID log, and then
press SELECT (only for cordless handsets).
-�R-
To enter the redial list, press
REDIAL (for both cordless handsets and the
telephone base).
Scroll to the desired entry.
Press
SELECT to dial the displayed number.
Join a call in progress
You can use the telephone base and a cordless handset, or two cordless handsets
at a time on an outside call. You can buy additional expansion handsets ( CS6609)
for this telephone base. You can register up to five handsets to the telephone base.
When a device is on a call, press or on another cordless handset, or lift
the corded handset or press /SPEAKER on the telephone base.
To exit the call, press �FF on the cordless handset or place it in the handset
charger, or place the corded handset on the telephone base or press /SPEAKER
on the telephone base. The call continues until all devices hang up.
Intercom
Use the intercom features for conversations between the telephone base and a
cordless handset, or two cordless handsets.
Press INT on the telephone base/cordless handset when not in use. When you
have more than one handset, use the dialing keys to enter a destination device
number ( 7 for the telephone base, or 1 to 5 for HANDSET 1 to HANDSET 5).
To answer the intercom call with the destination handset, press , , INT or
any dialing key.
-�R-
To answer the intercom call with the telephone base, press /SPEAKER, INT,
any dialing key or lift the corded handset.
To end an intercom call while using a cordless handset, press �FF or place the
cordless handset back in the handset charger.
-�R-
To end an intercom call while using the telephone base, press /SPEAKER or
INT when you are using the speakerphone, or return the corded handset to the
telephone base.
•
•
•
.
2.
3.
.
2.
3.
•
•
.
2.
3.