VTech CS6649_-2-3 Abridged manual - Manual (Page 6)

6
Using the menu
Press MENU when the telephone base/cordless handset is not in use.
Press or until the screen displays the desired feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL on the telephone base/
cordless handset.
To return to idle mode, press and hold CANCEL on the telephone base/
cordless handset.
Telephone settings
Default settings are indicated by an asterisk(*).
Menu setting Description �ptions
LCD language Set the screen display language. English*
Français
Español
�oicemail # Set the speed dial voicemail number. �oicemail #
_
Clr voicemail Turn off the voicemail indicators (see the
note below).
Reset �M Icon?
Key tone Turn an audible beep on or off whenever a
key is pressed.
Key tone: �n*
Key tone: �ff
Home area code Set the home area code so that the caller ID
log stores only seven digits for local
telephone numbers.
Home area code
_ _ _
Dial mode Set the telephone to be touch-tone or
pulse dialing.
Touch-tone*
Pulse
Use the Clr voicemail feature when the telephone indicates there is new voicemail but
there is none. For example, when you have accessed your voicemail while away from
home. The
Clr voicemail feature only turns off the indicators; it does not delete your
voicemail messages. As long as you have new voicemail messages, your telephone
service provider continues to send the signal that turns on the indicators.
The following are some of the telephone features you may wish to set. Refer to
Telephone settings in the online Complete user’s manual for detailed instructions
on setting all telephone features.
Ringer volume
You can adjust the ringer volume level, or turn the ringer off.
Press MENU when the telephone base/cordless handset is not in use.
Scroll to Ringers then press SELECT twice.
Press or to adjust the volume, then press SELECT to save.
If the ringer volume is set to �ff, the handset still rings when you press
FIND HANDSET on the telephone base.
Set date and time
If you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. You can also set the date and time manually.
Press MENU when the telephone base/cordless handset is not in use.
Scroll to Set date/time, then press SELECT.
Use the dialing keys ( 0-9) to enter the month (MM), date (DD) and year (YY),
then press SELECT.
Use the dialing keys ( 0-9) to enter the hour (HH) and minute (MM). Then press
or to choose AM or PM.
Press SELECT to save.
Quiet mode
You can turn on quiet mode for a period of time. During this period, all tones (except
paging tone) and call screening are muted. When you turn on the quiet mode, the
answering system turns on automatically.
Press and hold QUIET
#
when the telephone base/cordless handset is not
in use.
Use the dialing keys (
0-9) to enter the duration, then press SELECT to save.
To turn off the quiet mode, press and hold QUIET
#
when the telephone base/
cordless handset is not in use.
.
2.
3.
•
•
.
2.
3.
.
2.
3.
4.
5.
.
2.
•