VTech SN6187 Manual - Manual (Page 55)

49
Intercom
Use the intercom feature for conversations between two system devices.
Press MENU, then press or to scroll to
Intercom, then press SELECT.
If you have a handset and a pendant, the handset
shows Calling all pendants. The pendant rings.
If you have only two handsets, the handset shows
Calling other handset. The other handset rings
and shows Other handset is calling.
If you have more than three handsets and
pendants, your handset shows INTERCOM TO:
Press or to scroll to the desired device and
then press SELECT. You may also enter a
destination handset number ( 1-9), or enter
followed by 0-2 for HANDSET 10 to
HANDSET 12, or followed by # for
all devices.
The destination device rings. The destination handset shows
HANDSET X is calling/HANDSET X is calling all.
Your handset shows Calling HANDSET X/Calling all pendants/
Calling all devices.
To answer the intercom call on the destination handset, press ,
or any dialing key ( 0-9 or ). Both handsets now show Intercom.
-OR-
To answer the intercom call on a pendant, press .
1.
•
•
•
2.
Multiple handset use
Answering sys
>Intercom
Calling
other handset
Intercom
5:20
PM
12/02