VTech SN6187 Manual - Manual (Page 52)

Telephone operation
46
Transfer a call
While on an outside call, you can transfer the call from
a handset to another system device.
During a call, press MENU. Press or to scroll to
Transfer, then press SELECT.
If you have two or more handsets/pendants, your
handset shows TRANSFER TO: Press or to
scroll to the desired device and then press
SELECT. You may also enter a destination
handset number ( 1-9), or enter followed
by 0-2 for HANDSET 10 to HANDSET 12, or
followed by # for all devices.
The outside call is put on hold and the handset shows
Transferring call.../Transferring call to all...
The destination device rings and shows
Transferring from
HANDSET X.
To answer the call on the destination handset, press , or any
dialing key (
0-9 or ).
-OR-
To answer the call on the pendant, press .
If the destination device does not answer the call within 30 seconds,
the originating device displays No response to transfer. The call
will be reverted to the originating device.
If the destination device is in use, in the phonebook or caller ID log,
not powered or out of range, the originating device displays
No answer. Try again. and then reconnects to the outside call.
•
•
1.
•
2.
>Transfer
Intercom
TRANSFER TO:
>All devices