VTech SN6187 Manual - Manual (Page 30)

24
Telephone settings
Speed dial
There are two speed dial keys, 1 and 2, on the pendant.
Use a handset to store two contacts that you may need to call them
more often or right away. The handset displays To set pendant, see
manual when it is initially powered up. Press CANCEL and follow the
steps below to set speed dial entries.
Store a speed dial entry
Press MENU when the handset is not in use. when the handset is not in use..
Press or to scroll to Pendant, then press SELECT.
Press or to scroll to Memory 1 or Memory 2,
then press SELECT.
When MEMORY X NUMBER displays, use the
dialing keys to enter a number (up to 30 digits):
Press or to move the cursor to the left or right.
Press
DELETE to erase a digit.
Press and hold DELETE to erase all digits.
Press and hold PAUSE to enter a dialing pause
(a P appears).
Press SELECT.
When MEMORY X NAME displays, use the dialing
keys to enter a name (up to 15 characters). Each
time you press a key, the character on that key
appears. Additional key presses produce other
characters on that key. Press the key repeatedly
until the desired character appears. The first
character of each word is capitalized.
Press or to move the cursor to the left or right.
Press
0 to add a space.
Press DELETE to erase a character..
Press and hold DELETE to erase all characters.
Press SELECT to save. Then the handset displays
Memory X saved. You hear a confirmation tone.
1.
2.
3.
4.
•
•
•
•
5.
6.
•
•
•
•
7.
Set date/time
>Pendant
MEMORY X NUMBER
_
MEMORY X NAME
_
>Memory 1
Memory 2