VTech SN6127_-2 Abridged manual - Manual (Page 52)

46
Remote access code
A two-digit security code is required to access the
answering system remotely from any touch-tone
telephone. The preset code is 19. You can set the
code from 00 to 99.
Press MENU when idle.
Scroll to Answering sys, then press SELECT.
Scroll to Ans sys setup, then press SELECT.
Scroll to Remote code, then press SELECT.
Enter a two-digit number, then press SELECT.
Message alert tone
When the message alert tone is set to On, and
there is at least one new message, the telephone
base beeps every 10 seconds. The message alert
tone is preset to Off.
There is no audible alert at the handset.
Press MENU when idle.
Scroll to Answering sys, then press SELECT.
Scroll to Ans sys setup, then press SELECT.
Scroll to Msg alert tone, then press SELECT.
Scroll to On or Off, then press SELECT.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Answering system settings