VTech SN6127_-2 Abridged manual - Manual (Page 32)

26
Telephone settings Telephone settings
Home area code
If you dial your local calls using only seven digits
(area code not required), you can program your
home area code so that when you receive a call
within your local area, the telephone number is
automatically stored without the area code in the
caller ID log.
Press MENU when idle.
Scroll to Settings, then press SELECT.
Scroll to Home area code, then press SELECT.
Enter a three-digit home area code, then
press SELECT.
Dial mode
The dial mode is preset to touch-tone dialing. If
you have pulse (rotary) service, you must change
the dial mode to pulse dialing before using the
telephone to make a call.
Press MENU when idle.
Scroll to Settings, then press SELECT.
Scroll to Dial mode, then press SELECT.
Scroll to select Touch-tone or Pulse, then
press SELECT.
1.
2.
3.
4.
1.
2.
3.
4.