VTech SN6127_-2 Abridged manual - Manual (Page 18)

Getting started
12
Getting started
Deregister devices
If you want to replace a device, or reassign the
designated handset number of a registered
handset, you must deregister all devices that are
registered to the telephone base. Then register
each device individually.
To make deregistration easier, read all of the
instructions on this page before you begin.
Make sure no handset is put in the telephone
base before deregistration.
To deregister all devices:
Press and hold /FIND HANDSET at the side
of the telephone base for about 10 seconds
until the telephone base IN USE light turns
solid red and then flashes red, then release
/ FIND HANDSET.
Immediately press / FIND HANDSET.
All handsets show To register HS, see
manual. The deregistration process takes
about 10 seconds to complete.
To register the handset(s) to the telephone base
again, follow the registration instructions on
page 11.
You cannot deregister all devices if any
system device is in use.
1.
2.
3.