Velleman projects K8025 Assembly instructions - Manual (Page 8)

- 8 - - 9 -
Construction
LEDs 11
COLOR= 2...5
LD...
CATHODE
‰ LD1 : Interlace
‰ LD2 : NTSC
‰ LD3 : PAL
Watch the
polarity!
Tip: For easy mounting at the correct height
1. Mount the LEDs on the PCB
2. place the PCB with the leds on the front panel on flat surface.
3. Solder the connections.
12
2, 3
• Solder the signal wires of the RCA cable
(1,2 &3) to the pcb.
• Solder the shielding cable of the RCA cable
together en solder to the GND on the PCB.
����������������� ���������������������