Velleman projects VMBDMI Extended user manual - Manual (Page 14)

14 VMBDMI Dimmer manual – edition 1
34 Multiple position dimmer A push will select the next preferred lighting brightness from a table.
The time required to reach this setting and the switch-off time can be
configured. Up to 14 preferred lighting brightness’s can be stored in the
table. Factory defaults are: 25, 50, 75, 100, 75, 50 en 25%.
35 Forced off when switch closed As long as the switch is closed, the light can not be switched on.
36 Forced off when switch open As long as the switch is open, the light can not be switched on.
37 Forced off A push will prevent the light from being switched on during a specified
time period.
38 Enable or disable forced off
mode A push will prevent the light from being switched on during a specified
time period. Another push will end forced off mode.
39 End forced off Forced off mode is ended when pushing such a button.
Remark:
The forced off status can still be determined by the forced off when
switch open or closed.
40 Forced on when switch closed As long as the switch is closed the light is switched on and all other
operations are ignored.
Remark:
Forced off has precedence over forced on.
41 Forced on when switch open As long as the switch is open the light is switched on and all other
operations are ignored.
Remark:
Forced off has precedence over forced on.
42 Forced on A push will turn on the light and all other operations are ignored during
the preset time.
Remark:
Forced off has precedence over forced on
43 Switching on or off in forced-on
mode A push will turn on the light and all other operations are ignored during
the preset time. Another push will cancel forced-on mode.
Remark:
Forced off has precedence over forced on
44 Cancel forced-on A push will cancel forced-on mode
Remark:
The forced-on condition can still be determined by the forced on when
switch open/close function.
45 Cancel when switch closed As long as the switch is closed the light is off but the internal functions
remain active. When the switch is opened, the internal condition is
forwarded to the lamp.
46 Cancel when switch open As long as the switch is open the light is off but the internal functions
remain active. When the switch is closed, the internal condition is
forwarded to the lamp
47 Suppress A push will switch off the light during a preset time, but the internal
functions remain active.
48 Activate/deactivate suppress
mode A push will switch off the light during a preset time, but the internal
functions remain active. Another push will deactivate suppress mode.
49 Cancel suppress A push will forward the internal condition to the relay.